HSE4
Produktabbildung

Rotary-linear actuator HSE4

full flexibility in small space

Advantages
at a glance

      • compact und robust
      • wear resistant
      • high efficient end cushioning
      • angle adjustment ± 5°
      • adjustable drive shaft datum

 

Perfectly matched
for accurate rotary-linear-movements

The Eckart HSE4 rotary-linear-actuator is a combination of a rotary actuator and a dual-action linear cylinder. Consequently, with the HSE4, a rotary movement and and a linear movement can be executed in an extremely small space.


Since the rotary actuator and the linear cylinder are hydraulically driven separately, any movement sequences can be selected, such as rotaring to the left and right, linearly extending and retracting, etc. If both components are driven evenly, then both types of movement will be executed synchronously.

Specifications

Specificationen (standard)

Size6 sizes
max. torque at 100 bar65 to 2050 Nm
max. push force at 100 bar12.500 to 122.000 N
max. pull force at 100 bar7.500 to 72.000 N
Stroke10 mm to 1.200 mm / higher on request
Angle of rotationStandard 90°/180°/270°/360° and any intermediate angle, even above 360°
MediumHydraulic fluids DIN 51524, ISO 11158
HFC, HFD; others on request
min. operating pressure required5 to 10 bar
max. allowable operating pressure100 bar / higher on request
Installation positionas required, provided that adequate air bleeding is provided
Temperature range-25°C to +70°C / higher or lower on request
Absorption volume rotary actuator0,17 to 5,154 cm³/1°
max. time of0,3 m/s

Because of its torque, angle of rotation, pressure range, positioning accuracy, stability of position, type of attachment and dimensions, the Eckart HSE4 rotary actuator can be used in a wide range of applications. 

The selection and the size depends above all on the demands and the operating conditions under which the rotary-linear actuator is operating. For the planning of special items, it is also important for us to be aware of all technical details.

Applications

Typical application

  • Tool change
    Tool change
  • Bending machines
    Bending machines
  • Gate valve control
    Gate valve control
Downloads Contact

Select your regional contact person

Sven Zell

Your contact person - Other countries

Sven Zell

Eckart GmbH
Am Knöschen 2  .  36381 Schlüchtern
Germany

 

+49 6661 9628-21

to plan the route

write a message